Post by kaotenciopate on May 13, 2019 13:45:21 GMT
Main category / Utilities
Sub category / File Management
Developer / Daniele Kraehenbuehl
Filesize / 6656
Title / iMountX
▹ tinyuid.com/qbG84N
iMountX_vers.2.1.dmg
Tool for extracting steganographic content in images.
From dreambox web interface choose:
Learn how to use macOS Recovery to reinstall the Mac operating system on your built-in drive or an external drive.
Question: Q:
20.03.2011: libplist 1.4 has been released fixing memory leaks and a bug in writing binary plists. On Mac OS X, libimobiledevice and related libraries are now packaged by the Fink Project.
Simply drag this icon to your Applications folder and you’re done.
Official:
Mac macpkg.icu/?id=15152&kw=imountx-4.1-h0xlgn.zip [6323 KB]
Recomended to 10.13.5 macpkg.icu/?id=15152&kw=IMOUNTX.VERS.2.5.VBEX.DMG [6988 KB]
Delete iMount components in /Library
Fixed some bugs.
Desktop Clock 1.2 Easily viewable clocks with multiple styles
All three classes maintain an init() method that yields the volumes below it. You should call clean on the parser if you are done; you may also unmount separate volumes or disks, which will also unmount all volumes below it. Warning: unmounting one of the RAID volumes in a RAID array, causes the entire array to be unmounted.
The Autopsy Forensic Browser is a graphical interface to the command line digital investigation analysis tools in The Sleuth Kit. Together, they can analyze Windows and UNIX disks and file systems (NTFS, FAT, UFS1/2, Ext2/3).
mount(8) - Linux manual page
Fashioned a home made tool to extract it out: Pliers grabbing a cheap bent curtain rod holder as you can see here
Some of these options are only useful when they appear in the /etc/fstab file. Some of these options could be enabled or disabled by default in the system kernel. To check the current setting see the options in /proc/mounts. Note that filesystems also have per-filesystem specific default mount options (see for example tune2fs -l output for extN filesystems). The following options apply to any filesystem that is being mounted (but not every filesystem actually honors them – e.g., the sync option today has an effect only for ext2, ext3, ext4, fat, vfat and ufs): async All I/O to the filesystem should be done asynchronously. (See also the sync option.) atime Do not use the noatime feature, so the inode access time is controlled by kernel defaults. See also the descriptions of the relatime and strictatime mount options. noatime Do not update inode access times on this filesystem (e.g. for faster access on the news spool to speed up news servers). This works for all inode types (directories too), so it implies nodiratime. auto Can be mounted with the -a option. noauto Can only be mounted explicitly (i.e., the -a option will not cause the filesystem to be mounted). context=context, fscontext=context, defcontext=context, and rootcontext=context The context= option is useful when mounting filesystems that do not support extended attributes, such as a floppy or hard disk formatted with VFAT, or systems that are not normally running under SELinux, such as an ext3 or ext4 formatted disk from a non-SELinux workstation. You can also use context= on filesystems you do not trust, such as a floppy. It also helps in compatibility with xattr-supporting filesystems on earlier 2.4. kernel versions. Even where xattrs are supported, you can save time not having to label every file by assigning the entire disk one security context. A commonly used option for removable media is context="system_u:object_r:removable_t". Two other options are fscontext= and defcontext=, both of which are mutually exclusive of the context option. This means you can use fscontext and defcontext with each other, but neither can be used with context. The fscontext= option works for all filesystems, regardless of their xattr support. The fscontext option sets the overarching filesystem label to a specific security context. This filesystem label is separate from the individual labels on the files. It represents the entire filesystem for certain kinds of permission checks, such as during mount or file creation. Individual file labels are still obtained from the xattrs on the files themselves. The context option actually sets the aggregate context that fscontext provides, in addition to supplying the same label for individual files. You can set the default security context for unlabeled files using defcontext= option. This overrides the value set for unlabeled files in the policy and requires a filesystem that supports xattr labeling. The rootcontext= option allows you to explicitly label the root inode of a FS being mounted before that FS or inode becomes visible to userspace. This was found to be useful for things like stateless linux. Note that the kernel rejects any remount request that includes the context option, even when unchanged from the current context. Warning: the context value might contain commas, in which case the value has to be properly quoted, otherwise mount(8) will interpret the comma as a separator between mount options. Don't forget that the shell strips off quotes and thus double quoting is required. For example: mount -t tmpfs none /mnt -o \ 'context="system_u:object_r:tmp_t:s0:c127,c456",noexec' For more details, see selinux(8). defaults Use the default options: rw, suid, dev, exec, auto, nouser, and async. Note that the real set of all default mount options depends on kernel and filesystem type. See the beginning of this section for more details. dev Interpret character or block special devices on the filesystem. nodev Do not interpret character or block special devices on the file system. diratime Update directory inode access times on this filesystem. This is the default. (This option is ignored when noatime is set.) nodiratime Do not update directory inode access times on this filesystem. (This option is implied when noatime is set.) dirsync All directory updates within the filesystem should be done synchronously. This affects the following system calls: creat, link, unlink, symlink, mkdir, rmdir, mknod and rename. exec Permit execution of binaries. noexec Do not permit direct execution of any binaries on the mounted filesystem. group Allow an ordinary user to mount the filesystem if one of that user's groups matches the group of the device. This option implies the options nosuid and nodev (unless overridden by subsequent options, as in the option line group,dev,suid). iversion Every time the inode is modified, the i_version field will be incremented. noiversion Do not increment the i_version inode field. mand Allow mandatory locks on this filesystem. See fcntl(2). nomand Do not allow mandatory locks on this filesystem. _netdev The filesystem resides on a device that requires network access (used to prevent the system from attempting to mount these filesystems until the network has been enabled on the system). nofail Do not report errors for this device if it does not exist. relatime Update inode access times relative to modify or change time. Access time is only updated if the previous access time was earlier than the current modify or change time. (Similar to noatime, but it doesn't break mutt or other applications that need to know if a file has been read since the last time it was modified.) Since Linux 2.6.30, the kernel defaults to the behavior provided by this option (unless noatime was specified), and the strictatime option is required to obtain traditional semantics. In addition, since Linux 2.6.30, the file's last access time is always updated if it is more than 1 day old. norelatime Do not use the relatime feature. See also the strictatime mount option. strictatime Allows to explicitly request full atime updates. This makes it possible for the kernel to default to relatime or noatime but still allow userspace to override it. For more details about the default system mount options see /proc/mounts. nostrictatime Use the kernel's default behavior for inode access time updates. lazytime Only update times (atime, mtime, ctime) on the in-memory version of the file inode. This mount option significantly reduces writes to the inode table for workloads that perform frequent random writes to preallocated files. The on-disk timestamps are updated only when: - the inode needs to be updated for some change unrelated to file timestamps - the application employs fsync(2), syncfs(2), or sync(2) - an undeleted inode is evicted from memory - more than 24 hours have passed since the i-node was written to disk. nolazytime Do not use the lazytime feature. suid Honor set-user-ID and set-group-ID bits or file capabilities when executing programs from this filesystem. nosuid Do not honor set-user-ID and set-group-ID bits or file capabilities when executing programs from this filesystem. silent Turn on the silent flag. loud Turn off the silent flag. owner Allow an ordinary user to mount the filesystem if that user is the owner of the device. This option implies the options nosuid and nodev (unless overridden by subsequent options, as in the option line owner,dev,suid). remount Attempt to remount an already-mounted filesystem. This is commonly used to change the mount flags for a filesystem, especially to make a readonly filesystem writable. It does not change device or mount point. The remount operation together with the bind flag has special semantic. See above, the subsection Bind mounts. The remount functionality follows the standard way the mount command works with options from fstab. This means that mount does not read fstab (or mtab) only when both device and dir are specified. mount -o remount,rw /dev/foo /dir After this call all old mount options are replaced and arbitrary stuff from fstab (or mtab) is ignored, except the loop= option which is internally generated and maintained by the mount command. mount -o remount,rw /dir After this call, mount reads fstab and merges these options with the options from the command line (-o). If no mountpoint is found in fstab, then a remount with unspecified source is allowed. mount(8) allows to use --all to remount all already mounted filesystems which match a specified filter (-O and -t). For example: mount --all -o remount,ro -t vfat remounts all already mounted vfat filesystems in read-only mode. The each of the filesystems is remounted by "mount -o remount,ro /dir" semantic. It means the mount command reads fstab or mtab and merges these options with the options from the command line. ro Mount the filesystem read-only. rw Mount the filesystem read-write. sync All I/O to the filesystem should be done synchronously. In the case of media with a limited number of write cycles (e.g. some flash drives), sync may cause life-cycle shortening. user Allow an ordinary user to mount the filesystem. The name of the mounting user is written to the mtab file (or to the private libmount file in /run/mount on systems without a regular mtab) so that this same user can unmount the filesystem again. This option implies the options noexec, nosuid, and nodev (unless overridden by subsequent options, as in the option line user,exec,dev,suid). nouser Forbid an ordinary user to mount the filesystem. This is the default; it does not imply any other options. users Allow any user to mount and to unmount the filesystem, even when some other ordinary user mounted it. This option implies the options noexec, nosuid, and nodev (unless overridden by subsequent options, as in the option line users,exec,dev,suid). X-* All options prefixed with "X-" are interpreted as comments or as userspace application-specific options. These options are not stored in the user space (e.g. mtab file), nor sent to the helpers nor to the mount(2) system call. The suggested format is x-* The same as X-* options, but stored permanently in the user space. It means the options are also available for umount or another operations. Note that maintain mount options in user space is tricky, because it's necessary use libmount based tools and there is no guarantee that the options will be always available (for example after a move mount operation or in unshared namespace). Note that before util-linux v2.30 the x-* options have not been maintained by libmount and stored in user space (functionality was the same as have X-* now), but due to growing number of use-cases (in initrd, systemd etc.) the functionality have been extended to keep existing fstab configurations usable without a change. [=mode] Allow to make a target directory (mountpoint). The optional argument mode specifies the filesystem access mode used for mkdir(2) in octal notation. The default mode is 0755. This functionality is supported only for root users. The option is also supported as , this notation is deprecated for since v2.30. FILESYSTEM-SPECIFIC MOUNT OPTIONS top
[6789 kbytes] Free C23 2.4 iMountX 2.3 on Mac Pro
[6123 kbytes] Free UWH0 IMOUNTX 2.5 2.2 New 10.14.2
[7188 kbytes] Update M6AQTA 4.1 IMOUNTX 3.1 Recomended 10.14.1
[6922 kbytes] Download qKY v.4.1 iMountX 3.1 Updated OS X
[5324 kbytes] XJ3IL VER 2.5 IMOUNTX 3.1 Recomended to Mojave
[7720 kbytes] Software SWHm iMountX 2.5 3.1 10.13.4
[7055 kbytes] Software UNM vers.2.4 iMountX 2.2 Featured on Mojave
Updated for MacOS vers.3.4.1.VirtualC64.O4zd1.pkg [13031 kb] 3.2
Updated on Mac Pro 7zHw6_2.5.4_Timecode_Calculator.pkg [2702 kb] 2.5.7
Version on 10.14.3 ZjxzU.1.18.EventScripts.dmg [7136 kb] 2.16
Version for iMac Pro GQ1.AMAZON.CHIME.VERS.4.6.5869.APP [18245 kb] 4.4.5770